Independent Testing. Measurable Results. Peace of Mind.
A structured building and testing protocol developed to deliver healthier, more durable, and energy-efficient homes.
Section 1 — Why This Matters
Most homes are never tested for air quality, moisture performance, or energy efficiency before homeowners move in. Problems such as hidden moisture, poor air quality, and high utility costs often appear months or years later. Our Healthy Home™ Verification Process ensures your home is designed and built correctly from the start — and independently tested to confirm it.
Section 2 — What We Verify
Moisture & Mold Risk Prevention
- Foundation and wall moisture management systems
- No trapped moisture causing mold
- Vapor control layers and smart membranes
- Walls/ceilings Air tight but able to dry out
- Slabs air and vapor tight
- Drainage and drying pathways
- Regulating 30% to 50% Indoor Humidity
Indoor Air Quality Protection
- Controlled fresh air ventilation
- ASHRAE 62.2 compatible
- Continuous CFM venting via an ERV
- Filtration and pollutant control
- Merv 13 ERV filter
- ~Merv 10 handler filter
- Carbon Pre-filters where applicable
- Air sealing to prevent contaminant entry
- Design planning
- Proper enclosure systems
- Future-Proof Code Insulation:
- > R-15 Ext. Continuous foundation walls
- > R-10 Continuous under slab
- R-10 Ext. Continuous plus R-23 in 2×6 wall
- R-60 Attic Insulation
- Air leakage control (Code = 3 ACH50):
- >1.5 ACH50 Guarantee (Goal = >1)
- Below Grade Radon prevention
- 2 blower door tests to confirm
- Thermal comfort consistency
- No Drafts, uncomfortable rooms, cold feet
Clean Water Assurance
- Site specific, tested filtration for:
- Metals, chlorine, plastics, hormones & more.
Section 3 — Third-Party Testing
Independent Verification Includes:
- Blower Door Air Leakage Test
- Moisture & Mold Risk Assessment
- Ventilation System Verification
- Thermal Inspection (if applicable)
Conducted by qualified third-party professionals.
When Testing Occurs
Verification is performed at critical stages of construction:
- Pre-drywall inspection (when applicable)
- Final performance testing before occupancy
- System setup and homeowner orientation
Section 4 — Homeowner Deliverables
What they receive:
- Performance Test Results
- Air Tightness Score
- Moisture Risk Confirmation
- Ventilation System Settings
- Healthy Home Documentation Packet
- Mold Test Results
- EPA’s Indoor AirPlus Certification
Section 5 — Our Promise
Our goal is simple:
Provide a home that protects your health, maximizes comfort, and reduces long-term operating costs — backed by independent testing and measurable proof.
Because peace of mind should be built into your home from day one.
What Makes PLH Exclusives Different
Most builders rely on standard practices without verification.
We combine advanced building science with third-party testing to confirm results.
- Verified air tightness
- Verified moisture control
- Verified ventilation performance
- Verified Mold and Indoor Air Quality results
- Documented results for homeowners
